Projects

1
2

Break test non-rotating steel cable

Break test non-rotating steel cable

Test cover taps

Test cover taps

We tested the deck cranes for a French shipyard as part of a five-yearly survey. We use water bags for this purpose. LIFTAL conducts many tests with water bags. These have a low weight, are easy to transport and offer high accuracy and safety during testing.

Test crane blocks and construction for CORMORANT

Test crane blocks and construction for CORMORANT

For MULTRASHIP, after repairs, we tested the entire structure and crane blocks of their floating gantry, the CORMORANT.

Inspections and tests of mooring equipment

Inspections and tests of mooring equipment

A marine contractor asked us to carry out the five-yearly survey of the mooring equipment on four of their pontoons. We carried out the inspections and tests under the supervision of Lloyd's.

Dutch Marine BV inspection deck equipment

Dutch Marine BV inspection deck equipment

Dutch Marine BV, a consultant and project management provider in the maritime industry, always has a challenge for us. This time was no different! An inspection was needed on the GPS Avenger's equipment. They were only visiting Vlissingen for a very short period of time and this had to be done before their next voyage.

Testing Liner Lifting Tool

Testing Liner Lifting Tool

A creative engineering firm specialising in the design of customised mission equipment and temporary works asked us to come up with an idea for testing a Liner Lifting Tool. The target market is the nuclear industry in the United Kingdom. We developed an idea and the contract was awarded in no time.

Compagnie MECO Load testing Lifting beam

Compagnie MECO Load testing Lifting beam

Our French partner Compagnie MECO was responsible for project management for the load testing of four lifting beams for the French energy sector.

Heerema hoist replacement

Heerema hoist replacement

A malfunction in an overhead crane turned out to be the start of a larger project. During our visit, we saw that the hoist, which dated from 1979, was in poor condition. LIFTAL offered two options: overhaul or replacement. Because the crane was old and an overhaul would be expensive, the customer opted for a completely new hoist.

1
2

Versatile specialist in lifting and hoisting technology

LIFTAL is a flexible and versatile specialist in hoisting and lifting technology, climbing equipment, fall protection, test projects (up to 1,000 tonnes) and solutions for potentially explosive environments (ATEX). We combine our knowledge with a wide range of products.

Visual Projecten

Back to the top of the website